Belom is a Serbian military ammunition maker, and its catalog is small. The company publishes seven loads in three cartridges: 9 x 19 mm, 7.62 x 39 mm and 12.7 x 108 mm. The fastest loads are the 12.7 x 108 mm rounds at 810 to 825 metres per second, and the heaviest bullets are the 48.2 gram 12.7 x 108 mm BALL and API rounds.
Belom prints no downrange table of its own. Its specification sheets give a velocity measured at 16 or 24 metres from a proof barrel, plus pressure and weight figures. So the chart below covers the two commercial loads, the 9mm 124 grain FMJ to 100 yards and the 7.62×39 123 grain FMJ to 500 yards, and the full factory specification table follows it.
Table of Contents [Click to minimize]
Belom Ballistics: Velocity and Energy Chart: 9mm 124 Grain FMJ to 100 Yards
The 9mm chart uses a 50 yard zero and a 4 inch barrel. The bullet starts at 1,115 fps with 342 ft-lb of energy, and it is 8.2 inches low at 100 yards.
| Load | BC (G1) | Barrel | Velocity Muzzle (fps) | Velocity 25 yd (fps) | Velocity 50 yd (fps) | Velocity 75 yd (fps) | Velocity 100 yd (fps) | Energy Muzzle (ft-lb) | Energy 25 yd (ft-lb) | Energy 50 yd (ft-lb) | Energy 75 yd (ft-lb) | Energy 100 yd (ft-lb) | Bullet Path Muzzle (in) | Bullet Path 25 yd (in) | Bullet Path 50 yd (in) | Bullet Path 75 yd (in) | Bullet Path 100 yd (in) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 9 x 19 mm 124 gr FMJ | 0.134 | 4 in | 1115 | 1060 | 1014 | 976 | 943 | 342 | 309 | 283 | 263 | 245 | -0.2 | 0.9 | 0 | -3 | -8.2 |

7.62×39 123 Grain FMJ to 500 Yards
The 7.62×39 chart uses a 100 yard zero and a 20 inch barrel. The bullet starts at 2,350 fps with 1,495 ft-lb of energy, keeps 1,583 fps at 300 yards, and is 67.8 inches low at 400 yards. The published table prints +0.5 inches at 200 yards for this load, and no 500 yard drop figure.
| Load | BC (G1) | Barrel | Velocity Muzzle (fps) | Velocity 100 yd (fps) | Velocity 200 yd (fps) | Velocity 300 yd (fps) | Velocity 400 yd (fps) | Velocity 500 yd (fps) | Energy Muzzle (ft-lb) | Energy 100 yd (ft-lb) | Energy 200 yd (ft-lb) | Energy 300 yd (ft-lb) | Energy 400 yd (ft-lb) | Energy 500 yd (ft-lb) | Bullet Path Muzzle (in) | Bullet Path 100 yd (in) | Bullet Path 200 yd (in) | Bullet Path 300 yd (in) | Bullet Path 400 yd (in) | Bullet Path 500 yd (in) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 7.62 x 39 mm 123 gr FMJ | 0.282 | 20 in | 2350 | 2072 | 1817 | 1583 | 1368 | 1171 | 1495 | 1172 | 902 | 684 | 511 | 374 | 0.6 | 0 | 0.5 | -26.4 | -67.8 | – |
The Full Belom Factory Specification Table
Every load Belom publishes, in the metric units its specification sheets use. Velocities are measured at 16 metres for the 9mm loads and at 24 metres for the 7.62 and 12.7 loads, not at the muzzle. Belom publishes no ballistic coefficient and no trajectory table for any load.
| Load | Cartridge | Bullet Type | Bullet Weight | Velocity (m/s) | Velocity Measured At | Test Barrel | Max Pressure |
|---|---|---|---|---|---|---|---|
| 9 x 19 mm Luger 124gr FMJ | 9 x 19 mm Luger | FMJ | 8.00±0.10 g | 340±10 | at 16 m | 200 mm EPVAT proof barrel | ≤2400 bar |
| 9 x 19 mm BALL 124gr MIL | 9 x 19 mm | FMJ (BALL) | 8.00±0.10 g | 375±15 | at 16 m | 200 mm proof barrel | ≤2850 bar |
| 7.62 x 39 mm BALL M43 | 7.62 x 39 mm | FMJ (BALL M43) | 7.97±0.10 g | 715±10 | at 24 m | 600 mm EPVAT proof barrel | ≤3300 bar |
| 7.62 x 39 mm BALL M16 (TACTICAL) | 7.62 x 39 mm | FMJ (BALL M16) | 7.97±0.10 g | 700±10 | at 24 m | 600 mm EPVAT proof barrel | ≤3100 bar |
| 12.7 x 108 mm BALL | 12.7 x 108 mm | FMJ BALL | 48.2±0.8 g | 810-825 | at 24 m | 1008 mm proof barrel | ≤3400 bar |
| 12.7 x 108 mm API | 12.7 x 108 mm | API | 48.2±0.8 g | 810-825 | at 24 m | 1008 mm proof barrel | ≤3400 bar |
| 12.7 x 108 mm APIT | 12.7 x 108 mm | APIT | 44.0±0.8 g | 810-825 | at 24 m | 1008 mm proof barrel | ≤3400 bar |
How to Read the Belom Chart
The 9mm Loads
Belom lists two 9mm loads, and they are not the same round. The Luger 124 grain FMJ is built for law enforcement, training and competition, with a velocity of 340 metres per second at 16 metres. The MIL 124 grain BALL runs hotter at 375 metres per second, meets MIL-C-70508 and STANAG 4090, and is the only Belom load with a published energy figure.
The 7.62×39 Pair
The two 7.62×39 loads share a case, a bullet weight and a powder charge, and differ in the core. The M43 BALL carries a steel core and runs at 715 metres per second at 24 metres, while the M16 TACTICAL carries a lead core and runs at 700 metres per second. The steel core load is also rated to a higher maximum pressure.
The 12.7×108 Heavy Loads
The 12.7 x 108 mm loads are the big end of the Belom catalog. The BALL and API rounds fire a 48.2 gram bullet at 810 to 825 metres per second, and the APIT tracer fires a lighter 44.0 gram bullet at the same speed. The API round penetrates 15 mm of armour plate at 100 metres, and the tracer stays visible for at least 1,000 metres.
Velocity Measured at 16 and 24 Metres
Belom does not publish muzzle velocity. Its 9mm velocities are average velocities at 16 metres, and its 7.62 and 12.7 velocities are velocities at 24 metres, all fired from standard proof barrels at 21 degrees Celsius. The true muzzle velocity is slightly higher than the printed figure, because the bullet is still slowing as it travels to the measuring point.
The Energy Gap
Only one of the seven Belom loads carries a published energy figure. The 9mm MIL BALL is rated at at least 480 and under 620 joules, and every other load prints no energy at all. That is why the energy columns in the chart above come from the 9mm and 7.62×39 tables, while the factory table itself lists velocity, weight and pressure only.
No Ballistic Coefficient or Trajectory Table
Belom publishes no ballistic coefficient for any bullet and no drop table for any load. The G1 figures in the chart above, 0.134 for the 9mm and 0.282 for the 7.62×39, belong to the published tables those charts come from. Nothing in this article extends a Belom load past the distances its table covers.
Belom Ballistics FAQs
What calibers does Belom make?
Belom publishes seven loads in three cartridges: 9 x 19 mm, 7.62 x 39 mm and 12.7 x 108 mm. The 9mm loads are 124 grain FMJ, the 7.62×39 loads are 123 grain FMJ, and the 12.7 loads use 44.0 and 48.2 gram bullets.
What is the fastest Belom load?
The 12.7 x 108 mm BALL, API and APIT loads are the fastest, at 810 to 825 metres per second measured at 24 metres from a 1008 mm proof barrel. Among the commercial loads, the 7.62 x 39 mm BALL M43 is quickest at 715 metres per second, listed at 2,350 fps muzzle velocity in retail listings.
What is the hardest hitting Belom load?
The 12.7 x 108 mm BALL and API loads carry the heaviest bullets in the catalog at 48.2 grams, fired at 810 to 825 metres per second. Belom publishes no energy figure for them, so no foot-pound number is given here.
Why are Belom velocities measured at 16 and 24 metres?
Belom follows military proof practice and measures velocity downrange from the muzzle, at 16 metres for 9mm and 24 metres for 7.62 and 12.7 loads. The figure is an average velocity at that distance, not a muzzle velocity.
How far does the 9mm 124 grain FMJ drop at 100 yards?
On a 50 yard zero it is 8.2 inches low at 100 yards. It leaves the muzzle at 1,115 fps with 342 ft-lb of energy and still carries 943 fps and 245 ft-lb at 100 yards.
How far does the 7.62×39 123 grain FMJ drop at 300 yards?
On a 100 yard zero it is 26.4 inches low at 300 yards. It leaves the muzzle at 2,350 fps with 1,495 ft-lb of energy and still carries 1,583 fps and 684 ft-lb at 300 yards.
What is the difference between the M43 and M16 7.62×39 loads?
The M43 BALL uses a steel core and the M16 TACTICAL uses a lead core. The M43 runs 15 metres per second faster at 24 metres and is rated to 3,300 bar against 3,100 bar for the M16.
Does Belom publish a ballistic coefficient?
No, Belom publishes no ballistic coefficient, no test barrel length beyond the proof barrel, and no trajectory table for any of its seven loads. The G1 figures in the chart above come from the published tables used for those two loads.
What is the 12.7×108 APIT tracer?
It is an armour piercing incendiary tracer round with a 44.0 gram bullet, fired at 810 to 825 metres per second. The tracer becomes visible by 200 metres and stays visible for at least 1,000 metres.
Where is Belom ammunition made?
Belom is made in Serbia, at Uzici near Pozega, by Belom d.o.o. within the Yugoimport SDPR group. The company makes ammunition for military and law enforcement use, and its 9mm and 7.62×39 loads are also sold on the commercial market.