38 Special Velocity – 38 Special Muzzle Velocity – By Barrel Length (Inches)

As the .38 Special travels downrange, a standard 158-grain bullet sheds its speed steadily, dropping to roughly 260 fps at 1,000 yards. At the muzzle, velocities measure roughly 800 fps for standard 158-grain target loads and 950 fps for lighter 125-grain +P defensive projectiles. The charts below detail these velocity measurements across extreme distances and varying barrel lengths.

.38 Special Velocity Chart at 100 to 1,000 Yards

Note: The .38 Special is a short range revolver cartridge designed for engagements under 50 yards. Data beyond 100 yards represents mathematical model extrapolations. Reaching 500 to 1,000 yards requires extreme mortar like trajectory angles, and the bullet will enter terminal free fall well before reaching the 1,000 yard mark.

Distance (yards)Distance (meters)Ammunition / Bullet WeightBarrel Length (inches)Estimated Velocity (fps)Velocity Loss from Muzzle (fps)
Muzzle (0)0.0 m158-gr Federal LRN (BC: ~0.150)4.0800 fps (Published)0 fps
100 yards91.4 m158-gr Federal LRN (BC: ~0.150)4.0710 fps (G1 Calculation)90 fps
200 yards182.9 m158-gr Federal LRN (BC: ~0.150)4.0630 fps (G1 Calculation)170 fps
300 yards274.3 m158-gr Federal LRN (BC: ~0.150)4.0560 fps (Extrapolation)240 fps
400 yards365.8 m158-gr Federal LRN (BC: ~0.150)4.0500 fps (Extrapolation)300 fps
500 yards457.2 m158-gr Federal LRN (BC: ~0.150)4.0450 fps (Extrapolation)350 fps
600 yards548.6 m158-gr Federal LRN (BC: ~0.150)4.0400 fps (Extrapolation)400 fps
700 yards640.1 m158-gr Federal LRN (BC: ~0.150)4.0360 fps (Extrapolation)440 fps
800 yards731.5 m158-gr Federal LRN (BC: ~0.150)4.0320 fps (Extrapolation)480 fps
900 yards823.0 m158-gr Federal LRN (BC: ~0.150)4.0290 fps (Extrapolation)510 fps
1,000 yards914.4 m158-gr Federal LRN (BC: ~0.150)4.0260 fps (Terminal Free-Fall)540 fps

.38 Special Muzzle Velocity Chart

Ammunition TypeBullet Weight (grains)Barrel Length (inches)Muzzle Velocity (fps)Muzzle Energy (ft-lbs)
158-grain Lead Round Nose

Federal American Eagle

[Manufacturer Spec]
1584.0 (Standard Revolver)800 (Advertised)225
158-grain Lead Round Nose

Federal American Eagle

[Independent Estimate]
1582.0 (Snub Nose)700 (Estimated)172
130-grain FMJ

Winchester Target

[Manufacturer Spec]
1304.0 (Standard Revolver)800 (Advertised)185
125-grain JHP +P

Hornady Critical Defense +P

[Manufacturer Spec]
1254.0 (Standard Revolver)950 (Advertised)250
125-grain JHP +P

Hornady Critical Defense +P

[Independent Estimate]
1252.0 (Snub Nose)850 (Estimated)200

Factors Affecting Velocity

  • Barrel Length: The .38 Special is heavily utilized in 2-inch snub nose revolvers for concealed carry. Because the barrel is so short, the powder does not have enough time to fully combust before the bullet exits. Dropping from a 4-inch duty barrel to a 2-inch barrel generally costs the cartridge 100 to 150 fps in muzzle velocity.
  • Standard vs Overpressure (+P): Originally designed in the late 1800s, standard .38 Special operates at a very low pressure limit. Modern firearms can handle higher pressures, so manufacturers offer +P ammunition. This overpressure ammunition increases the velocity by roughly 100 fps, which is highly recommended for ensuring hollow point bullets expand reliably.
  • The Cylinder Gap: Because the .38 Special is a revolver cartridge, a small amount of pressurized gas escapes through the gap between the cylinder and the barrel forcing cone. This inherent design bleeds off a tiny amount of velocity compared to a sealed chamber system.
  • Bullet Weight: Traditional loads feature heavy 158-grain bullets moving at slow speeds around 750 to 800 fps. Modern defensive loads often utilize lighter 110-grain or 125-grain bullets to increase the velocity closer to 1,000 fps, which greatly improves terminal ballistics in soft tissue.
See also  .308 Velocity - .308 Muzzle Velocity - By Barrel Length (Inches)

Frequently Asked Questions (FAQs)

Is the .38 Special a subsonic cartridge?

Yes. Almost all standard pressure .38 Special loads, especially the heavy 158-grain variants, travel well below the speed of sound (which is roughly 1,125 fps). Even most lightweight +P loads hover around 950 to 1,000 fps, keeping them entirely subsonic.

Can I shoot .38 Special ammunition in a .357 Magnum?

Yes. The .357 Magnum was developed directly from the .38 Special by simply lengthening the cartridge case to hold more powder. You can safely fire .38 Special rounds in any .357 Magnum firearm. The .38 Special will produce significantly less velocity and much milder recoil.

How much velocity does a snub nose revolver actually lose?

A 2-inch snub nose revolver typically loses 10 to 15 percent of its muzzle velocity compared to a 4-inch barrel. A standard 158-grain bullet that achieves 800 fps in a 4-inch barrel will usually clock in around 700 fps out of a 2-inch barrel.

Does .38 Special +P ammo wear out a gun faster?

In older, vintage revolvers not rated for it, +P ammunition can cause rapid wear or catastrophic failure. However, in modern revolvers explicitly stamped for .38 Special +P or .357 Magnum, the higher velocity ammunition is perfectly safe and will not cause premature damage under normal shooting schedules.

Leave a Comment