The .35 Remington cartridge features a standard bullet diameter of 0.358 inches (9.1 mm) and a maximum case length of 1.920 inches (48.8 mm).
Its maximum overall cartridge length is standardized at 2.525 inches (64.1 mm) to accommodate traditional lever-action and semi-automatic rifles.
The lower case layout incorporates a rim diameter of 0.460 inches (11.7 mm) and a base diameter of 0.458 inches (11.6 mm).
Moving upward, the case features a shoulder diameter of 0.405 inches (10.3 mm) and a neck diameter of 0.384 inches (9.8 mm).
Published specifications reflect nominal dimensions, maximum design envelopes, or manufacturing tolerances established by SAAMI.
Reviewing these core geometric values is crucial for evaluating chamber fit, case capacity, and safe operating performance.
35 Remington Dimensions
| Dimension | Inches | Millimeters | Specification Type | Source | Notes |
| Bullet Diameter | 0.358 in | 9.1 mm | Nominal | SAAMI | Standard .358 caliber projectile standard |
| Case Length | 1.920 in | 48.8 mm | Maximum | SAAMI | Maximum allowable length from case head to mouth |
| Overall Cartridge Length | 2.525 in | 64.1 mm | Maximum (COAL) | SAAMI | Built for lever and semi-automatic actions |
| Rim Diameter | 0.460 in | 11.7 mm | Maximum | SAAMI | Rimless extraction design profile |
| Base Diameter | 0.458 in | 11.6 mm | Maximum | SAAMI | Body diameter just forward of the extractor groove |
| Shoulder Diameter | 0.405 in | 10.3 mm | Nominal / Max | SAAMI | Measured at the junction of the shoulder and body |
| Neck Diameter | 0.384 in | 9.8 mm | Maximum | SAAMI | Dimension at the case neck for loaded round clearance |
| Shoulder Angle | 23.4° | 23.4° | Nominal | SAAMI | Moderate 23-degree 25-minute shoulder geometry |
| Case Capacity | 49.0 gr H₂O | 3.18 ml | Measured / Nominal Usable | Industry / SAAMI | Usable water capacity to the mouth |
| Maximum Pressure | 33,500 psi | 231 MPa | Maximum Average Pressure (MAP) | SAAMI | Upper pressure safety threshold |
Understanding The 35 Remington Dimensions
Analyzing the .35 Remington cartridge dimensions involves examining how its balanced mid-bore profile was designed for woods hunting and medium-range efficiency. The bullet diameter spans 0.358 inches, providing a heavy frontal area well-suited for dense brush.The case length of 1.920 inches and overall cartridge length (COAL) of 2.525 inches allow the cartridge to operate smoothly in standard short actions and tubular magazine lever-action platforms.
The lower geometry relies on a rim diameter of 0.460 inches and a base diameter of 0.458 inches, maintaining a rimless configuration that feeds reliably from box or tubular magazines.The case tapers upward into a moderate shoulder angle of approximately 23.5 degrees and a shoulder diameter of 0.405 inches, ensuring consistent headspacing.The neck diameter (0.384 inches) provides secure bullet grip without excessive tension.
35 Remington Dimensions In Inches And Millimeters
To assist reloaders and ballistic technicians, core .35 remington dimensions are listed below in both inches and millimeters.
| Parameter | Inches (in) | Millimeters (mm) |
| Bullet Diameter | 0.358 in | 9.1 mm |
| Case Length (Max) | 1.920 in | 48.8 mm |
| Cartridge Overall Length (Max) | 2.525 in | 64.1 mm |
| Base Diameter | 0.458 in | 11.6 mm |
| Rim Diameter | 0.460 in | 11.7 mm |
| Shoulder Diameter | 0.405 in | 10.3 mm |
| Neck Diameter | 0.384 in | 9.8 mm |
35 Remington Case Dimensions
The .35 remington case dimensions reflect a rimless, bottleneck design introduced by Remington in 1906. Featuring a maximum case length of 1.920 inches and a base diameter of 0.458 inches, the casing provides ample internal volume for traditional medium-power powders.
The body features a slight taper leading to a 23.5-degree shoulder and a distinct neck designed to accept .358-inch projectiles. SAAMI specifications establish strict maximum boundaries, while commercial brass incorporates precise manufacturing tolerances to ensure uniform wall thickness and reliable chamber fitting.
35 Remington Bullet Diameter
The official .35 remington bullet diameter is standardized at 0.358 inches (9.1 mm).This classifies it within the broad .358 caliber family, sharing projectile diameters with cartridges like the .358 Winchester and .35 Whelen.
It is vital to separate bullet diameter from bore diameter (the raised lands of the rifling) and groove diameter (the deepest valley span). Utilizing a true .358-inch projectile allows the cartridge to harness heavy-hitting round-nose and modern flex-tip bullets optimized for timber and brush hunting.
35 Remington Overall Cartridge Length
The published maximum overall cartridge length (COAL) for the .35 remington is 2.525 inches (64.1 mm). This dimension is critical because it ensures cartridges fit correctly within traditional lever-action magazines and semi-automatic feed mechanisms without binding.
While commercial factory loads are strictly engineered to meet or stay below this limit, handloaders must monitor overall length carefully—especially when using specialized spitzer or polymer-tipped bullets—to guarantee safe cycling and proper chamber throat clearance.
35 Remington Case Capacity
The .35 remington case capacity averages approximately 49.0 grains of water ($H_2O$) when measured to the mouth. This internal volume strikes an effective balance for moderate-pressure loads, pushing medium-weight bullets at efficient velocities without inducing heavy recoil.
Because brass manufacturing variances can shift internal volume slightly between commercial lots, nominal published capacity serves as a reliable baseline rather than an absolute figure. Reloaders should adjust powder charges when transitioning between different brass brands.
35 Remington Dimensions vs Similar Cartridges
Comparing the .35 remington with other classic lever-action and medium-bore cartridges illustrates its distinct spatial layout.
| Cartridge | Bullet Diameter | Case Length | Overall Length | Rim / Base Diameter | Case Capacity | Source |
| 35 Remington | 0.358 in | 1.920 in | 2.525 in | Rim: 0.460 in / Base: 0.458 in | ~49.0 gr H₂O | SAAMI |
| 30-30 Winchester | 0.308 in | 2.039 in | 2.550 in | Rim: 0.506 in / Base: 0.422 in | ~52.0 gr H₂O | SAAMI |
| 358 Winchester | 0.358 in | 2.015 in | 2.780 in | Rim / Base: 0.473 in | ~56.0 gr H₂O | SAAMI |
| 300 Savage | 0.308 in | 1.871 in | 2.600 in | Rim: 0.473 in / Base: 0.471 in | 52.5 gr H2O | SAAMI |
35 Remington vs 30-30 Winchester Dimensions
Both the .35 remington and the .30-30 Winchester are legendary American deer cartridges, but their dimensional profiles differ significantly. The .30-30 Winchester utilizes a rimmed case with a rim diameter of 0.506 inches and a base diameter of 0.422 inches, featuring a longer case length of 2.039 inches.
In contrast, the .35 remington uses a rimless design with a 0.460-inch rim and a 0.458-inch base, coupled with a slightly shorter case length of 1.920 inches.While the .35 Remington features a wider bullet diameter (0.358 in vs. 0.308 in) providing a larger frontal area, their overall cartridge lengths are comparable (2.525 in vs. 2.550 in), though their actions and bolt faces are entirely distinct.
35 Remington Chamber And Cartridge Dimensions
Chamber dimensions for the .35 remington are meticulously cut to accommodate rimless bottleneck rounds while ensuring smooth feeding and extraction. Headspacing relies on the 23.5-degree shoulder datum.
The chamber throat features a specific leade designed to accommodate flat-nose or round-nose projectiles safely without jamming them into the rifling lands. Controlled tolerances between the chamber walls and maximum cartridge dimensions prevent excessive brass stretching during firing.
35 Remington Bullet Weight And Dimensions
The .35 remington accommodates a targeted range of bullet weights, historically centered around 150-grain, 200-grain, and occasional 220-grain configurations.
While projectile weight does not alter standardized case dimensions, physical bullet length and ogive shape heavily dictate seating depth requirements—particularly for tubular magazines where flat or rubber-tipped profiles are mandatory to prevent primer ignition under recoil.
Why 35 Remington Dimensions Matter
Precise cartographic measurements govern every aspect of .35 remington utility:
- Chamber Fit & Headspacing: Correct shoulder dimensions ensure safe headspace indexing upon chambering.
- Feeding Reliability: Adhering to the 2.525-inch COAL ensures smooth operation in lever-action and semi-automatic rifles.
- Pressure Regulation: Conforming to SAAMI case volumes maintains peak operating pressures at or below the 33,500 psi limit.
- Component Selection: Helps prevent dangerous mix-ups with similarly dimensioned cases and guides proper reloading practices.
Manufacturer Specifications vs Independent Measurements
Official dimensions for the .35 remington are regulated by SAAMI standards, establishing maximum envelope limits and a Maximum Average Pressure ceiling of 33,500 psi (or 33,500 CUP).
While factory ammunition and commercial brass strictly adhere to these blueprints, independent measurements of older vintage firearms or fired cases can show minor variations due to historical chamber wear or tool tolerances. Official SAAMI data remains the ultimate benchmark for cartridge geometry.
Common Questions
What are the dimensions of 35 Remington?
The .35 Remington features a bullet diameter of 0.358 inches, a maximum case length of 1.920 inches, a maximum overall length of 2.525 inches, a base diameter of 0.458 inches, and a rim diameter of 0.460 inches.
What is the 35 Remington case length?
The maximum SAAMI case length is 1.920 inches (48.8 mm).
What is the 35 Remington overall length?
The maximum overall cartridge length (COAL) is 2.525 inches (64.1 mm).
What is the 35 Remington bullet diameter?
The standardized bullet diameter is 0.358 inches (9.1 mm).
What is the 35 Remington rim diameter?
The rim diameter is 0.460 inches (11.7 mm).
What is the 35 Remington base diameter?
The maximum base diameter is 0.458 inches (11.6 mm).
What is the 35 Remington case diameter?
The base diameter measures 0.458 inches maximum, with a shoulder diameter of 0.405 inches.
What is the 35 Remington case capacity?
Usable case capacity averages approximately 49.0 grains of water ($H_2O$).
How does 35 Remington compare with 30-30 Winchester dimensions?
The .35 Remington uses a rimless case with a 0.460-inch rim, whereas the .30-30 Winchester uses a rimmed case with a larger 0.506-inch rim.
Is 35 Remington the same size as 358 Winchester?
No. While both fire a 0.358-inch bullet, the .358 Winchester is based on a larger .308 Winchester case, offering a longer case length and higher pressure limits.
What is the maximum overall length of 35 Remington?
The maximum SAAMI overall length is 2.525 inches.
What is the 35 Remington maximum pressure?
The SAAMI Maximum Average Pressure (MAP) limit is 33,500 psi.