22-250 Remington Reloading Data

Reliable .22-250 Remington reloading data is widely available through manufacturer manuals and online resources provided by Hodgdon, Sierra, Nosler, and Hornady. Published data typically covers bullet weights from 40 grains up to 60 grains, detailing starting and maximum powder charges, muzzle velocities exceeding 3,500 to 4,000 fps, and chamber pressures up to the SAAMI maximum limit of 65,000 PSI. Because the .22-250 Remington is a high-velocity centerfire cartridge with a large powder capacity relative to its bore size, minor component variations in large rifle primer selection, seating depth, and powder burn rates can significantly affect pressure consistency and accuracy.

22-250 Remington Reloading Data Overview

Bullet StyleBullet WeightPowderPublished Starting LoadPublished Maximum LoadPublished VelocityBarrel Length / FirearmSource
Hornady V-Max40 grHodgdon Varget36.5 gr40.0 gr3,850 to 4,100 fps24″ / Test BarrelHodgdon / Hornady
Nosler Ballistic Tip50 grIMR 406434.0 gr37.5 gr3,450 to 3,680 fps24″ / Modern Bolt ActionNosler / Hodgdon
Sierra BlitzKing55 grHodgdon H38036.0 gr39.5 gr3,350 to 3,580 fps24″ / Test BarrelHodgdon / Sierra
Hornady SP60 grAlliant Reloder 1532.5 gr36.0 gr3,150 to 3,390 fps24″ / Test BarrelHornady / Alliant
Barnes VNT50 grHodgdon Benchmark33.0 gr36.5 gr3,500 to 3,750 fps24″ / Precision RigBarnes / Hodgdon

Understanding The .22-250 Remington Reloading Data

Working up .22-250 Remington load data requires careful attention to thermal dynamics and pressure curves:

  • Starting Load: The conservative minimum charge weight recommended by testing laboratories to ensure clean ignition and consistent pressure development.
  • Maximum Published Load: The peak pressure threshold established by testing facilities, running up to 65,000 PSI.
  • Velocity: Quantified in feet per second at the muzzle, reflecting the extreme speed of light varmint bullets.
See also  300 Blackout Subsonic Effective Range

.22-250 Remington Powder Reloading Data

Selecting the correct propellant involves matching medium-burn-rate rifle powders that build efficient gas volume without creating excessive peak pressures:

PowderBulletBullet WeightPublished Starting LoadPublished Maximum LoadPublished VelocitySource
Hodgdon VargetHornady V-Max40 gr36.5 gr40.0 gr3,850 to 4,100 fpsHodgdon
IMR 4064Nosler Ballistic Tip50 gr34.0 gr37.5 gr3,450 to 3,680 fpsNosler
Hodgdon H380Sierra BlitzKing55 gr36.0 gr39.5 gr3,350 to 3,580 fpsHodgdon
Alliant Reloder 15Hornady SP60 gr32.5 gr36.0 gr3,150 to 3,390 fpsHornady
Hodgdon BenchmarkBarnes VNT50 gr33.0 gr36.5 gr3,500 to 3,750 fpsBarnes

Component And Assembly Best Practices

Because the .22-250 Remington generates high velocities and barrel heat, strict assembly standards are necessary:

  • Cartridge Overall Length: Standard specifications require an overall length typically set near 2.350 inches depending on the bullet ogive and magazine constraints.
  • Primer Selection: Standard large rifle primers are typically used, though magnum primers can help achieve uniform ignition with slow-burning ball powders like H380.
  • Barrel Heat Management: Because of high velocities and rapid powder burn rates, .22-250 barrels heat up quickly. Allow proper cooling between target strings to preserve throat life.

Common .22-250 Remington Reloading Questions

What are the best powders for .22-250 Remington?

Top-performing propellants include Hodgdon Varget, IMR 4064, H380, and Alliant Reloder 15.

What bullet weights work best?

Weights ranging from 40 grains to 55 grains provide the highest velocities and best accuracy for traditional factory twist rates (typically 1-in-14 inches).

See also  44 Mag vs 45-70 Ballistics Chart

What is the max pressure limit?

SAAMI establishes a maximum average pressure limit of 65,000 PSI for the .22-250 Remington cartridge.

Are you loading for a standard factory barrel with a 1-in-14 twist rate or a custom fast-twist barrel?

Leave a Comment